Driving around with a lit service light can be nerve racking to say the least. These “dummy” lights can be tripped for a variety of reasons and it isn’t always obvious what caused it. If you have found the problem and fixed it, the light doesn’t always automatically turn off. Here are some steps to reset the VW Golf service light.
Do It Yourself
You can reset the light by yourself with minimal investment from a local auto parts store. You will need to purchase a VAG service and airbag reset tool. This tool is a small diagnostic tool that you will use to hook into your car.
After you purchase or acquire this tool, follow these steps:
- Turn the ignition switch off.
- Connect the VAG service and airbag reset tool to the diagnostic system. This is located under the hood’s release latch.
- Find and press the reset tool’s “Select” button.
- Turn the ignition switch to “on,” however without starting the engine.
- Find and press the “Enter” button on the reset tool. Then, wait 10 seconds for the reset tool’s lights to light up.
- Next, turn the ignition to the “off” position.
- Lastly, remove the reset tool from the car and verify the job is complete.
One of the easiest ways to reset the service light is to visit your local VW dealer. There technicians will hook the car up to an OBD scan device using the Assembly Line Diagnostic Link (ALDL). This scanner will tell the technician what error code is setting off the light and will diagnose the problem. If there is no problem, the technician will enter information into the scanner like make, model and year. Then they will choose the option to “pull” the codes and then they will hit the “reset” button.
While this option does invest time and money, it is the quickest way to get the light to turn off.
Turning off the service light can be a great relief. Next time the light turns on, get it checked out and fix the problem ASAP. This will reduce your worry, concern that your car is operating perfectly.